All In Sealer D 552 AVTS
Continuous stainless steel sealer with an integrated conveyor for closing bags at high production speeds, with the bags placed vertically. This machine can also perform heat sealing of cardboard headers onto bags.
En savoir plusDescription
The vertical All In Sealer is designed for sealing all types of plastic or complex bags.
The sealing head and transport conveyor are mounted on four wheels, two of which have brakes, making the machine highly mobile. The conveyor height is adjustable in 75 mm increments by bolting, to ensure easy integration with other conveyors at the machine's entry or exit. A small shelf at the conveyor head assists with bag positioning before it is fed into the machine. The sealing head height is adjusted using a screw mechanism to align the seal according to the height of the bags to be sealed. The speed is adjustable via an electronic variable speed drive, and the sealing temperature is controlled by a digital thermostat.
Once the top of the bag is inserted between the transport belts, the sealing area continuously passes between the PTFE bands, through heating bars and then cooling bars. Before releasing the bag, pressure rollers ensure a perfect seal. These sealing rollers allow the All In Sealer to close gusseted bags and potentially heat-seal cardboard headers (pending testing based on the thickness and quality of the headers).
The machine can also be offered in a version without a conveyor, designed for integration into an existing production line with its own bag support conveyor. In such cases, it is important to verify the compatibility of speed adjustments between the systems.
The All In Sealer D 552 models are equipped with an automatic cooling mode. If the machine needs to be stopped and the sealing temperature is above 80°C, the machine will cool down until the temperature drops below 80°C, then automatically switch to standby mode. These features help preserve the PTFE bands during shutdown procedures.
- Reference
- D 552 AVTS
- Sealing width
- 10 mm
20 mm (optional) - Maximum film thickness
- 2 x 200 microns
- Minimum film thickness
- 2 x 20 microns
- Coating
- Stainless steel
- Sealing type
- Heat sealing
- Max. height bags / sealing
- 40 mm
- Validation
- No
- Max. saeling speed
- 10 m/min
- Conveyor
- Yes
- Conveyor direction
- Left-Right (optional)
Right-Left - Variable speed
- Yes
- Conveyor width
- 250 mm
- Protection IP
- IP 20
- Voltage
- 230 V mono
- Consumption
- 1200 W
-
Kit SAV pour All In Sealer D 552
Kit SAV comprenant : 2 petites courroies de 500mm, 2 grandes courroies de 1320mm, 4 bandes, 2 résistances.€723.00 -
-
Courroie crantée 5mm x 500mm pour D 552
Courroie crantée 5mm x 500mm pour soudeuse en continu All in Sealer D 552.€48.36 -
Courroie crantée 5mm x 1320mm pour D 552
Courroie crantée 5mm x 1320mm pour soudeuse en continu All in Sealer D 552.€110.18 -
Résistance, éléments de chauffe pour soudeuse en continue All In Sealer D 552€88.34